QConeGeometry Class
(Qt3DExtras::QConeGeometry)The QConeGeometry class allows creation of a cone in 3D space. 更多...
| 头文件: | #include <Qt3DExtras/QConeGeometry> |
| qmake: | QT += 3dextras |
| 开始支持版本: | Qt 5.7 |
| Instantiated By: | ConeGeometry |
| 基类: | Qt3DRender::QGeometry |
属性
|
|
- 1 个属性继承自 Qt3DRender::QGeometry
- 3 个属性继承自 Qt3DCore::QNode
- 1 个属性继承自 QObject
公有函数
| QConeGeometry(QNode *parent = nullptr) | |
| float | bottomRadius() const |
| bool | hasBottomEndcap() const |
| bool | hasTopEndcap() const |
| Qt3DRender::QAttribute * | indexAttribute() const |
| float | length() const |
| Qt3DRender::QAttribute * | normalAttribute() const |
| Qt3DRender::QAttribute * | positionAttribute() const |
| int | rings() const |
| int | slices() const |
| Qt3DRender::QAttribute * | texCoordAttribute() const |
| float | topRadius() const |
| void | updateIndices() |
| void | updateVertices() |
- 4 个公有函数继承自 Qt3DRender::QGeometry
- 11 个公有函数继承自 Qt3DCore::QNode
- 32 个公有函数继承自 QObject
公有槽函数
| void | setBottomRadius(float bottomRadius) |
| void | setHasBottomEndcap(bool hasBottomEndcap) |
| void | setHasTopEndcap(bool hasTopEndcap) |
| void | setLength(float length) |
| void | setRings(int rings) |
| void | setSlices(int slices) |
| void | setTopRadius(float topRadius) |
- 1 个公有槽函数继承自 Qt3DRender::QGeometry
- 3 个公有槽函数继承自 Qt3DCore::QNode
- 1 个公有槽函数继承自 QObject
信号
| void | bottomRadiusChanged(float bottomRadius) |
| void | hasBottomEndcapChanged(bool hasBottomEndcap) |
| void | hasTopEndcapChanged(bool hasTopEndcap) |
| void | lengthChanged(float length) |
| void | ringsChanged(int rings) |
| void | slicesChanged(int slices) |
| void | topRadiusChanged(float topRadius) |
- 1 个信号继承自 Qt3DRender::QGeometry
- 4 个信号继承自 Qt3DCore::QNode
- 2 个信号继承自 QObject
受保护的函数
| QConeGeometry(QConeGeometryPrivate &dd, QNode *parent = nullptr) |
- 2 个受保护的函数继承自 Qt3DCore::QNode
- 9 个受保护的函数继承自 QObject
其他继承的成员
详细描述
The QConeGeometry class allows creation of a cone in 3D space.
The QConeGeometry class is most commonly used internally by the QConeMesh but can also be used in custom Qt3DRender::QGeometryRenderer subclasses. The class allows for creation of both a cone and a truncated cone.
属性
bottomRadius : float
Holds the bottom radius of the cone.
访问函数:
| float | bottomRadius() const |
| void | setBottomRadius(float bottomRadius) |
Notifier signal:
| void | bottomRadiusChanged(float bottomRadius) |
hasBottomEndcap : bool
Determines if the cone bottom is capped or open.
访问函数:
| bool | hasBottomEndcap() const |
| void | setHasBottomEndcap(bool hasBottomEndcap) |
Notifier signal:
| void | hasBottomEndcapChanged(bool hasBottomEndcap) |
hasTopEndcap : bool
Determines if the cone top is capped or open.
访问函数:
| bool | hasTopEndcap() const |
| void | setHasTopEndcap(bool hasTopEndcap) |
Notifier signal:
| void | hasTopEndcapChanged(bool hasTopEndcap) |
indexAttribute : Qt3DRender::QAttribute * const
Holds the geometry index attribute.
访问函数:
| Qt3DRender::QAttribute * | indexAttribute() const |
length : float
Holds the length of the cone.
访问函数:
| float | length() const |
| void | setLength(float length) |
Notifier signal:
| void | lengthChanged(float length) |
normalAttribute : Qt3DRender::QAttribute * const
Holds the geometry normal attribute.
访问函数:
| Qt3DRender::QAttribute * | normalAttribute() const |
positionAttribute : Qt3DRender::QAttribute * const
Holds the geometry position attribute.
访问函数:
| Qt3DRender::QAttribute * | positionAttribute() const |
rings : int
Holds the number of rings in the geometry.
访问函数:
| int | rings() const |
| void | setRings(int rings) |
Notifier signal:
| void | ringsChanged(int rings) |
slices : int
Holds the number of slices in the geometry.
访问函数:
| int | slices() const |
| void | setSlices(int slices) |
Notifier signal:
| void | slicesChanged(int slices) |
texCoordAttribute : Qt3DRender::QAttribute * const
Holds the geometry texture coordinate attribute.
访问函数:
| Qt3DRender::QAttribute * | texCoordAttribute() const |
topRadius : float
Holds the top radius of the cone.
访问函数:
| float | topRadius() const |
| void | setTopRadius(float topRadius) |
Notifier signal:
| void | topRadiusChanged(float topRadius) |
成员函数
QConeGeometry::QConeGeometry(QNode *parent = nullptr)
Default constructs an instance of QConeGeometry.
[protected] QConeGeometry::QConeGeometry(QConeGeometryPrivate &dd, QNode *parent = nullptr)
Copy constructor.
void QConeGeometry::updateIndices()
Updates indices based on geometry properties.
void QConeGeometry::updateVertices()
Updates vertices based on geometry properties.